MAKER SYNTHETIC COMPRESSOR 220

Gama Maker MAKER SYNTHETIC COMPRESSOR 220
Maker
Fully Synthetic

Zinc-free lubricant formulated with synthetic bases (PAO) specially designed for the lubrication of air compressors with special cleanliness requirements. It stands out for its low tendency to form carbonaceous residue due also to its very low sulphur content, which prevents the formation of deposits both on the equipment and in the downstream process. Its synthetic bases and special formulation give it exceptional resistance to oxidation and chemical degradation, which multiplies its useful service life. This product is miscible with mineral oils, although mixing will result in decreased product performance.

    Technical Information

    Quality levels, approvals and recommendations

    ISO: 6743-3 DAB/DAJ/DGB/DGC
    NUOVO PIGNONE: SOP86677 (A,D)
    DIN: 51506 VDL

    Qualities

    High thermal and chemical stability.
    Very good rust and corrosion protection.
    Excellent water separation and defoaming properties.
    Very high viscosity index, allowing lubrication in a wide temperature range.
    Low tendency to form deposits.

    Related products

    MAKER SYNTHETIC THOR 100
    MAKER ARIES 220
    Range of oils of the so-called turbine type, both due to their manufacturing process and because, in fact, some of the oils are specifically formulated for said application. They are obtained from selected paraffinic bases to which oxidation, rust and anti-foam inhibitor additives are added to endow them with excellent properties and magnificent performance in service. The lowest viscosity oils (ISO grades 7, 15 and 22) are generally used in high precision or highly revolutionary mechanisms. ISO grades between 32 and 100 (inclusive) are normally used in turbines, mainly steam or hydraulic, but they are also highly suitable for compressors, hydraulic systems, etc. The higher viscosity oils (types 125, 150, 220 and 380) are suitable for the lubrication of various types of mechanical equipment, in casing or by circulation. Range of oils of the so-called turbine type, both due to their manufacturing process and because, in fact, some of the oils are specifically formulated for said application. They are obtained from selected paraffinic bases to which oxidation, rust and anti-foam inhibitor additives are added to endow them with excellent properties and magnificent performance in service. The lowest viscosity oils (ISO grades 7, 15 and 22) are generally used in high precision or highly revolutionary mechanisms. ISO grades between 32 and 100 (inclusive) are normally used in turbines, mainly steam or hydraulic, but they are also highly suitable for compressors, hydraulic systems, etc. The higher viscosity oils (types 125, 150, 220 and 380) are suitable for the lubrication of various types of mechanical equipment, in casing or by circulation.