MAKER SYSTEM EP 100

Gama Maker MAKER SYSTEM EP 100
Maker
Mineral
These oils are obtained from carefully selected paraffinic bases to which specific additives are added to endow them with marked extreme pressure and anti-wear properties. Therefore, in addition to having a high viscosity index, these oils are highly resistant to oxidation and have excellent demulsifying capacity, easily attaining load step 10 in the FZG test. These oils are typically used to lubricate bearings by circulation subject to very severe service conditions, including water contamination, normally used in rolling mills. Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads, only medium loads. These oils, despite their EP additives, remain innocuous in the presence of metals, for which they can be used to lubricate large-diameter slow-speed plain bearings by means of drip feed, oil bath or oil ring lubrication. In their lowest level of viscosity, these oils are also used to lubricate medium-speed ball or roller bearingss.
    Technical Information

    Quality levels, approvals and recommendations

    MORGOIL®: MORGOIL® Lubricant Specification;
    SMS Group: SN 180-3
    ISO: 6743/2 – FC
    DIN: 51517/3 - CLP
    Load capacity equivalent to that required by DIN 51524 part 2-HLP

    Qualities

    High viscosity index.
    Low pour point.
    Low level of soot.
    Excellent water separation.
    Excellent anti-rust properties.
    Marked extreme pressure properties.

    Related products

    MAKER SYNTHETIC THOR 100
    MAKER MERAK VDL 100
    MAKER ARIES 100
    Range of oils of the so-called turbine type, both due to their manufacturing process and because, in fact, some of the oils are specifically formulated for said application. They are obtained from selected paraffinic bases to which oxidation, rust and anti-foam inhibitor additives are added to endow them with excellent properties and magnificent performance in service. The lowest viscosity oils (ISO grades 7, 15 and 22) are generally used in high precision or highly revolutionary mechanisms. ISO grades between 32 and 100 (inclusive) are normally used in turbines, mainly steam or hydraulic, but they are also highly suitable for compressors, hydraulic systems, etc. The higher viscosity oils (types 125, 150, 220 and 380) are suitable for the lubrication of various types of mechanical equipment, in casing or by circulation. Range of oils of the so-called turbine type, both due to their manufacturing process and because, in fact, some of the oils are specifically formulated for said application. They are obtained from selected paraffinic bases to which oxidation, rust and anti-foam inhibitor additives are added to endow them with excellent properties and magnificent performance in service. The lowest viscosity oils (ISO grades 7, 15 and 22) are generally used in high precision or highly revolutionary mechanisms. ISO grades between 32 and 100 (inclusive) are normally used in turbines, mainly steam or hydraulic, but they are also highly suitable for compressors, hydraulic systems, etc. The higher viscosity oils (types 125, 150, 220 and 380) are suitable for the lubrication of various types of mechanical equipment, in casing or by circulation.
    MAKER ZEUS SLIDEWAY 100
    Lubricant oils specially formulated for lubricating machine-tool slideways, both horizontal and vertical. They are formulated from mineral oils obtained from highly refined paraffinic bases having a high viscosity index and latest-generation additives that give it its characteristic adherence, anti-wear, extreme pressure and anti-stick-slip properties, facilitating movements and displacements without jumps. Specific oils for highly loaded machine-tool slideways. Due to their special slipperiness and load support characteristics, they can be used in textile machinery elements, printing machinery elements or industrial machinery elements greased by drip feed lubrication in which it is easy to retain the oil. ISO-32 and 68 grades are used as hydraulic fluids in those systems in which, in addition to the hydraulic circuit, it is also necessary to lubricate the slideways. Adequate for high-precision machine-tools. Lubricant oils specially formulated for lubricating machine-tool slideways, both horizontal and vertical. They are formulated from mineral oils obtained from highly refined paraffinic bases having a high viscosity index and latest-generation additives that give it its characteristic adherence, anti-wear, extreme pressure and anti-stick-slip properties, facilitating movements and displacements without jumps. Specific oils for highly loaded machine-tool slideways. Due to their special slipperiness and load support characteristics, they can be used in textile machinery elements, printing machinery elements or industrial machinery elements greased by drip feed lubrication in which it is easy to retain the oil. ISO-32 and 68 grades are used as hydraulic fluids in those systems in which, in addition to the hydraulic circuit, it is also necessary to lubricate the slideways. Adequate for high-precision machine-tools.
    MAKER TELEX E 100
    MAKER HYDROFLUX EP 100
    MAKER HIDROLEO 100
    MAKER ASTRA 100
    MAKER FG HYDRAULIC 100
    MAKER GASHOLDER 100
    MAKER SUPER TAURO SYNTH 100